Store Categories

Accept Credit Cards
You are here:Home > Boat Outfitting
Choose a sub category:
Battery Chargers Cameras
Deck / Galley Entertainment
Plumbing/Ventilation Trolling Motors
Sort By:
Page of 1
Jabsco Pumpgard Low Profile In-Line Strainer 3/4" ID Hose 46400-0000 Magma A10-080 Round Rail Mount Fits 7/8" or 1" inch for Marine/Boat Kettle Grill
List Price: $19.99
Smart e-Price: $17.59
Sale Price: $17.59
You save $2.40!
Smart e-Price: $48.98
Jabsco Pumpgard In-Line Strainer 3/4" Barb (Low Profile)

Round Rail Mount - Fits standard round rails 7/8" or 1" (22 mm or 25.5 mm)

ProMariner ProSport 8 Gen 3 HD On-Board Marine Boat Battery Charger 8 Amp 2 Bank Minn Kota Riptide SE 70 Trolling Motor with Latch&Door/Hand Control 24V-70lb-52"
List Price: $162.42
Smart e-Price: $89.95
You save $72.47!
List Price: $829.99
Smart e-Price: $805.00
You save $24.99!

ProSport 8 Gen 3 Heavy Duty Recreational Series On-Board Marine Battery Charger - 8 Amp - 2 Bank

Increased Power & Performance...Heavy Duty Recreational Series On-Board
Marine Battery Charger


ProSport Gen 3 On-Board Marine Battery Chargers incorporate all-digital microprocessor control. Like no other, the ProSport Series provides automatic installation feedback with its exclusive "System Check OK" and individual "Battery Bank Trouble" LED indicators, and also has the most advanced energy saving mode. After fully charging and conditioning batteries, ProSport's Energy Saver Mode will monitor and Auto Maintain batteries only when needed to maintain a full state of charge, resulting in maximum reserve power performance and lower AC power consumption and operating costs.

ProSport incorporates Distributed-On-Demand™ Charging technology, taking 100% of the available charging amps and distributing them to any one or combination of all batteries as needed for faster charging.

ProSport is 100% waterproof and shockproof, weighing 40% lighter than older technology epoxy filled chargers providing cooler operation and greater reliability. Each ProSport model has 4 digitally selectable charge profiles including a once-a-month storage reconditioning mode for extending battery life.

ProMar Digital Technology
Microprocessor and software controlled pulse charging technology delivering a 40% lighter design than the previous generation of epoxy filled chargers, cooler charger operation and faster charging.

System OK & Battery Bank Trouble Status Indicators
Advanced technology eliminates time consuming troubleshooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank.

Digital Multi-Stage Performance Charging
Fully charge and extend the life of your batteries. Automatically charges, conditions and safely maintains all batteries on board for maximum time on the water.

Storage Recondition Mode
During short or long-term storage, ProSport automatically reconditions all
batteries on board once a month for maximum battery life and performance.

Distributed-On-Demand™ Technology
Automatically charges and maintains your engine crank battery while
distributing all remaining charging amps to trolling motor or house battery/batteries.

Digital LED Display & Battery Type Selector
LED indicators for charging, conditioning and maintain modes in addition to AC power and selected battery type (2 charge profiles to choose from with a 3rd high performance AGM HP profile on the ProSport20 Dual only).

Built-in Quality & Safety
Compact and rugged extruded aluminum design, dual in-line DC safety fuses for trolling motor and house battery banks. Built-in over-voltage, overload, over-temperature, reverse polarity and ignition protection.

Features:

  • Storage Recondition Mode
  • System OK and Battery Bank Trouble Status
  • Digital LED Display
  • Digital Battery Type Selector (HP AGM cap available on ProSport20 Dual only.)
  • Pre-wired for easy installation

Specifications:

  • Amps - Output: 8 Amp
  • Banks: 2 Bank
  • Voltage - Output (Volts): 12/24V
  • Box Dimensions: 6"H x 9"W x 11"L WT: 5.15 lbs
  • UPC: 031669430082

Quick Guide (pdf)
Owner's Manual (pdf)

Riptide SE 70
Saltwater Edge-Mount
#1355920

The updated motor mounts on the Riptide SE motors feature an extruded upper arm made from marine-grade anodized aluminum that is built for years of trouble-free use.

All Riptide SE motors are constructed to withstand the harsh environment of saltwater and the anodized aluminum upper arm is no exception. The motors also feature fully encapsulated electronics and a patented sacrificial zinc anode for added corrosion protection. Riptide SE motors also include Digital Maximizer technology that provides up to five times longer run time on a single charge.

Riptide SE motors also utilize a Latch & Door mounting system for easy removal of the motor for security and storage. Adding to its ruggedness, The =Riptide SE has a composite shaft that is guaranteed for life

Rock-Solid Riptide SE Mount
Riptide SE's ultra-strong, lightweight mount features a smaller footprint and tempered, marine-grade extruded aluminum construction. It stows securely in rough water with its positive rear stow latch; while a Latch & Door Design makes removing your motor easy.

Quick-Lock Cam Depth Adjuster
Change depths simply and securely with the Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

Tilt/Extend Tiller
Get the best of both worlds on your hand control motor with the new Tilt/Extend Tiller. It can both tilt (up to 45°) and extend (6") to fit the way you fish.

Push-to-Test Battery Gauge - Riptide SE
Get an instant "state of charge" with this easy-to-read gauge.

Digital Maximizer
Digital Maximizer™ controls and optimizes power to extend battery life and reduce damaging heat. You'll stay on the water up to five times longer on a single charge.

Weedless Wedge 2 Prop
Push weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge™ 2 features swept-back, flared blades for unrelenting, reliable prop performance.

Advanced Corrosion Protection
Riptide motors are impervious to saltwater's corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it's all done, you're left with unequaled corrosion protection.

Full Encapsulated Electronics
Marine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater.

Sacrificial Anode
Galvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a patented sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that's completely protected from saltwater's destructive forces.

Indestructible Composite Shaft - Guaranteed For Life!
Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break, kink or corrode. That's why we're confident enough to make it the only trolling motor shaft that's guaranteed for life.

Cool, Quiet Power
Nothing runs cooler or more quietly than a Minn Kota®. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they'll never hear you coming

   
 
Live Chat Software